72V 57AH BATTERY
Are you a thrill seeker that is after ultimate performance, extreme power density and up to a 15kW tune?! This massively powerful 72v battery has 213% more energy than the stock battery and will deliver all the thrills you could want. Note this battery will require the use of a controller upgrade and will not run on the stock 60v controller. In addition, this battery will require a new 72v charger and cannot be charged on the stock 60v charger.**
**Note: Both 60v and 72v Batteries will require seat extenders to fit in the same space as the stock SurRon battery. We have designed the EBMX Seat Extenders to perfectly fit this new battery. We cannot guarantee compatibility with other brands of seat extenders. This could cause incompatibility and fitment issues with aftermarket seats. If you have any questions regarding fitment, please contact us before placing an order.
These high powered controller kits are intended for off road riding using on/off throttle, not continuous throttle applications. Modifying e motos with these controllers and tunes make them illegal to ride on the road. After installing an aftermarket controller and getting a high powered tune, you are running the risk of damaging your motor. Even with our motor temperature protection enabled, it is still possible to damage your motor if you push the motor outside of its limits. To ensure you do not cause damage to your motor, follow the advice below:
- Do not use wide open throttle for longer than 10-15 seconds. Do not do repeated full throttle runs.
- Do not consistently ride the bike in high power modes, only use the power mode you need at the time.
- Do not ride for long distances where you are on 3/4 or full throttle consistently for long periods of time.
If you need to use your bike for long rides using consistent throttle then you will need to significantly reduce the power level of the tune to ensure you can ride for stained periods without damage. Just for comparison, the stock bike in Sport mode running at full throttle is running at 5-6kW, after you put on a KO MOTO CONTROLLER and high powered battery you will be pushing up to 15kW (3 times the power of the stock bike) and it cannot be expected for this not to take a toll on the motor. Please be mindful and smart when modifying and riding e motos.
Hence the KO MOTOR swap is the perfect long term solution, so as to have ample power handling (up to 35Kw) and strain the motor far less as a result.
SURRON FIT : STRAIGHT TO THE BIKE WITH KO CONTROLLER CABLES ADAPTER
TALARIA FIT : NEEDS AN EXTRA CABLE FOR THE BATTERY PLUS THE KO CONTROLLER CABLES ADAPTER
KO CONTROLLER & KO MOTOR
Be one of the first to receIve the KO Moto Sur-Ron and Talaria Factory Spec combo upgrade motor and controller. Designed from the ground up to give unmatched torque and power, without suffering from all of the issues that plague the stock Sur-ron / Talaria motor and controller offering.
Easy to fit
Both the motor and controller are designed to be a plug and play option in the Sur-Ron and are easy to fit, using the same cabling and also the same default Sur-Ron display unit. Gone is the need to upgrade your display unit and run additional extra cabling across your bike.
For fitting in Talaria bikes you just need an extra battery cable. link
- Colour - Available in RED or BLUE
- INPUT VOLTAGE RANGE - 40v-100v
- WORKING VOLTAGE - 48-99.9V
- MAX PHASE CURRENT 830A
- MAX CURRENT 450A
- MAXIMUM POWER - 45000W
- OPERATING TERMAPERATURE - -25—80℃
- INGRESS PROTECTION - IP67
- MAXIMUM EFFICIENCY - ＞98%
MOTOR CASING FEATURES
- Colour - Gold and Black
DIRECT DROP IN REPLACEMENT FOR SUR-RON AND SEGWAY X260.
MOTORWEIGHT (INCLUDING WIRES) - 10KG,
MOTORCYCLE GRADE ANODIZED FINISH FOR MAXIMUM DURABILITY AND HEAT DISPERSION (NOT POWER COATED).
7075 AIRCRAFT GRADE BILLET MACHINED END CAPS AND SENSOR CAP.
STAINLESS STEEL WATER PROOF PHASE AND SENSOR WIRE GLANDS.
INTERNAL MOTOR FEATURES
INTERNAL MAGNET MOTOR (IPM) KO DESIGNED MANUFACTURED ROTOR / STATOR.
STATOR DIMENSIONS - 160mm X 53mm.
WORKING VOLTAGE - 60V-100V.
COLD ROLLED SAE 1045 STEEL SHAFT
CUSTOM KO DESIGNED AND PATENTED ROTOR AND HEAT SINK DESIGN ALLOWS HEATSOAK DISSIPATION ON THE ENDS OF THE STATOR.
KO DESIGNED AND PATENTED INTERNALS PRESSURE EQUALIZATION SYSTEM COMPATIBLE.
KO DESIGNED AND PATENTED CRYO COLD AIR INJECTION SYSTEM COMPATIBLE.
KO DESIGNED AND MANUFACTURED CRYO ROTOR/ STATOR ANTI CORROSION COATING.
INDUSTRY LEADING SKF BEARING AND SEALS FOR THE LOWEST ROLLING RESISTANCE AND EFFICIENCY.
JAPANESE SOOURCED 0.15 NIPPON STEEL STATOR / ROTOR LAMINATED.
INDUSTRY LEADING 0.15mm AIR GAP.
INDUSTRY LEADING 150°C / 302F SH50 NEO MAGNETS.
HAND WOUND 220°C HIGH TEMP COPPER WINDINGS.
CUSTOM WATERPROOF DESIGNED (IP69) AND MANUFACTURED HALL SENSOR WITH 12 MONTH REPLACEMENT WARRANTY AGAINST WATER / MOISTURE DAMAGE.
MOTOR OPERATING SPECIFICATION
PEAK POWER - 35KW
MAX TORQUE @60V - 52NM
MAX STABLE ROTOR RPM - 12,000RPM
MAX EFFICIENCY 97%
IMPORTANT : SEAT KIT LIFT AND BATTERY CABLE ADAPTER FOR TALARIA NOT INCLUDED
Shipping UK Mainland
Postage and packing to mainland UK for orders over £50 is FREE, we will do our utmost to get your product to you as soon as possible and will keep you informed every step of the way.
Delivery of the Goods shall be made to the Buyer's delivery address specified in the order.
You can track your item and arrange delivery or collection from a depot using the tracking code you will receive by email once the item has been dispatched.
Please note that orders may be delayed up to 72 hours in some cases due to the interruption of delivery services caused by the COVID-19 outbreak.
- 48h* Tracked £3,99
- Free Delivery UK over £50 (mainland)
Delivery is made by either UPS or a reputable courier service.
Exceptions to free delivery are courier deliveries to the following regions :
- Northern Ireland
- Scottish Highlands* and islands
- Channel Islands
- Isle of Man
- Isle of Wight
INTERNATIONAL ORDERING & DELIVERY
Contact us to know the rate for shipping items to your Country.
You have 14 days from the date in which your product has been delivered to return your product.
To obtain a full refund, the goods must be returned in an “as new” condition, unridden with all parts, manuals and accessories included in the original box and packaging. Mileage on returned e-scooters and e-bikes must be less than 1km.
If you've made any alterations to the item, including removing it from the packaging, then we may partially refund you based on the condition of the item.
We will not pay for you to post your item(s) back and the initial postage cost is non-refundable.